Profile
| We are committed to safe and healthy working conditions for all employees and do not use any form of forced, compulsory or child labor. We respect the dignity of the individual and the right of employees to freedom of association. |
|
When trying to make Brass anchors , Brass fasteners, Brass inserts, Brass hex nuts, Brass machined parts, brass components, Brass turned components, Brass machined components,. Brass CNC components. You can use Brass extruded rods or Brass cast rods. here is the technical difference-
Brass extruded rods: In an electric induction furnace Copper/Zinc are melted and then poured into billets. These heated billets are under high temperature and pressure extruded on a press into solid rods , hollow rods or special profiles. They are further drawn /straightened as needed.
There is tight control on the metallurgy and physical properties.The length is 10-12 feet and physical /chemical properties are maintained to a specific standard.
Brass cast rods: Brass scrap is melted in small coal fired foundries. The molten metal is poured by hand in to moulds which have hexagonal shape and cast in to rods about 4 ft long. They are then drawn on a draw bench to arrive at cast rods which are machined further.
Some basic differences:
1) Chemical properties- cast rods can contain impurities which might .might not be acceptable to EU laws. The percentage ration of Copper/Zinc/Lead is not maintained. Extruded and drawn rods have consistent and controlled chemical /metallurgical properties. All extruded rods have better traceability and spectrograph tests conducted on each production batch.
2) Porosity/brittleness/strength: There is no guarantee with cast rods whereas extruded rods have compliance to a standard
3)Economy: The cast rods are about 4-5% cheaper than extruded ones. However when making parts which generate more scrap this gets compounded a you might need 5-6 Kgs of Brass rods to make 1 Kg of finished products. Here the 4% difference will become 20-25% difference
4)Finish: Parts made from extruded Brass will have better thread finish and better Brass tinge (more Golden as usually higher Copper). This however is not easy for a lay person to figure out.
|
| Customers: |
| We are committed to deliver the products/goods our buyers have bought from us - of the quality requisitioned and within the time agreed. |
| Suppliers: |
| We are committed to accept the goods we have bought and to adhere to the terms of payment strictly. |
| Compliance Monitoring: |
| We have "of our free will and choice" set these principles for us and continuously monitor our Compliance therewith for the sake of our own conscience and satisfaction. |
| All Types of Brass Cable Glands, Brass Battery Terminals, Brass and Gun Metal Earthing Accessories, Brass & G.I. Conduit Fittings, Brass Pins for Plug and Socket & OEM Components, Brass Neutral Links & Terminal Block, Brass Sanitary Fittings , Grease Nipple & Auto Accessories, Brass Anchors, Brass Screw, |
| Bolt, Nut and Fasteners, Brass Fancy Builders Hardware such as Hinges, Tower Bolt, Window Fittings, Copper Cable Lugs & CP Products, Sheet Metal Parts and Brass pannel board, Brass pcb terminals, Brass line taps, connectors for t-blocks, Brass hrc fuse, Brass Inserts, Brass Washers, Brass electrical plug pins & Socket pins, Brass Turned parts and many other customized products. |
| We are looking for partners (companies or physical persons) in the view of co-operation for extending the selling of our products and services in foreign market. |
| If you are interested in, please send your intent letter at e-mail address: |
